The YS-110α introduces numerous new exciting functions, opening a whole new digital generation. For example, by connecting it to digital cameras with pre-flash function using a fiber-optic cable, the YS-110α can be used in the fully automatic DS-TTL adjustment mode (Digital Slave TTL). Enjoy complete creative control when you want absolute control over fine light adjustments, you can use a main strobe in DS-TTL mode and a secondary strobe in manual mode or you can set up an advanced lighting system using two strobes in DS-TTL mode. The DS-TTL adjustment function is also available using the light level control dial for fine control of the light amount when taking pictures in DS-TTL mode. You can also choose from 13 levels of manual controls when you do not want to leave the light adjustment up to the camera. The flat, round, 105° beam angle (with diffuser), achieved by the balanced positioning of the 3 flash tubes, and the power of a Guide Number 22 are examples of the excellent performance of the strobe that is sure to satisfy even the most demanding professionals.
The YS-110 also provides full manual control that sets flash intensitythat is independent of the camera. The 13-step manual control providesa finely graded variety of light settings up to a powerful maximumsetting of guide number 22. Three xenon tubes positioned in the strobeprovide a flat balance all the way across a circular beam angle of 105°(with diffuser), with even and consistent light that will satisfy evenfinicky professionals.
The YS-110 contains a high-luminosity white LED target light located inthe center of its front face. The target light turns on with aconvenient button press on the strobes rear panel, and turns offautomatically when the YS-110 flashes. You can connect the strobe todigital SLR cameras and film cameras using the same cables that connectconventional YS-series strobes. You can also connect the strobe tocompact digital cameras using a fiber-optic cable.
The YS-110 is a versatile strobe designed for almost any use.
| Item |
Specifications |
A: Alkaline, O: Oxyride, Ni-MH |
| Guide Number (ISO 100/m)(land) |
22 |
| Beam Angle |
105°× 105° (with diffuser) |
| Batteries 4× AA |
A: 6V Ni-MH: 4.8V |
| Number of Flashes*1 |
A: 230 Ni-MH: 330 |
| Recycle time (full)*2 |
A: 2.5 sec Ni-MH: 1.9 sec |
| Color temperature |
5400K |
| Color temperature w/diffuser |
5100K |
| Depth rating |
60m / 200ft |
| Dimensions(WxHxD) |
88x115x150mm / 3.5x4.6x6inch |
| Weight |
700g / 24.5oz |
| Underwater weight |
-10g / -0.4oz |
| Others |
Exposure control: DS-TTL, TTL, Light levelcontrol dial (GN): 2/2.8/3.5/4/5.6/6.7/8/9.5/11/13/16/19/22 (13 steps)Pre-flash control : Equipped with pre-flash cancel mode (cancels onepre-flash) Slave function TTL slave (cordless TTL) Sync Cord:Detachable Sync Cord with film & digital SLR camera, fiber-opticcable (L-type) with a compact digital camera. Over-pressure reliefvalve.
LED target light |
*1 Number of flashes and recycle time depend on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested by 2700mAh batteries. |
|
 |
$919.95
$48.00
$399.00
$899.00
Loading... Please wait...
