* Different cords and connectors will be required depending on the specific camera you are using.
Make sure that you order the appropriate cord. Cords are sold separately.
* Specifications subject to change without notice.
The YS-110 strobe is packed with
ground-breaking features designed for the new age of digital
photography. When it’s connected via a fiber-optic cable to a compact
digital camera with TTL metering, the YS-110 strobe offers DS-TTL
(Digital Slave Through-The-Lens) light adjustment. DS-TTL follows the
camera’s TTL-adjusted flash for automatically accurate flash
photography. You can use two YS-110 strobes for creative effects with
subtle light balance. For example, you can set one strobe to DS-TTL
mode and the second strobe to manual mode. The YS-110’s mode
compensation function provides a light level control dial for just the
right balance of light.
The YS-110 also provides full manual control that sets flash intensity
that is independent of the camera. The 13-step manual control provides
a finely graded variety of light settings up to a powerful maximum
setting of guide number 22. Three xenon tubes positioned in the strobe
provide a flat balance all the way across a circular beam angle of 105°
(with diffuser), with even and consistent light that will satisfy even
finicky professionals.
The YS-110 contains a high-luminosity white LED target light located in
the center of its front face. The target light turns on with a
convenient button press on the strobe’s rear panel, and turns off
automatically when the YS-110 flashes. You can connect the strobe to
digital SLR cameras and film cameras using the same cables that connect
conventional YS-series strobes. You can also connect the strobe to
compact digital cameras using a fiber-optic cable.
The YS-110 is a versatile strobe designed for almost any use.
Item
Specifications
A: Alkaline, O: Oxyride, Ni-MH
Guide Number (ISO 100/m)(land)
22
Beam Angle
105°× 105° (with diffuser)
Batteries 4× AA
• A: 6V • O: 6V • Ni-MH: 4.8V
Number of Flashes*1
• A: 160 • O: 230 • Ni-MH: 320
Recycle time (full)*2
• A: 6 • O: 3 • Ni-MH: 3
Color temperature
5400K
Color temperature w/diffuser
5100K
Depth rating
60m / 200ft
Dimensions(WxHxD)
88x115x150mm / 3.5x4.6x6inch
Weight
700g / 24.5oz
Underwater weight
-10g / -0.4oz
Others
•Exposure control: DS-TTL, TTL, Light level
control dial (GN): 2/2.8/3.5/4/5.6/6.7/8/9.5/11/13/16/19/22 (13 steps)
•Pre-flash control : Equipped with pre-flash cancel mode (cancels one
pre-flash) •Slave function •TTL slave (cordless TTL) •Sync Cord:
Detachable Sync Cord with film & digital SLR camera, fiber-optic
cable (L-type) with a compact digital camera. •Over-pressure relief
valve.
•LED target light
*1 Number of flashes and recycle time depend on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested by 2700mAh batteries.
If receiving your order before a deadline is important, please see our FAQ's and choose your shipping method accordingly! Call us if you have any questions or if you're in a rush. Thanks!
We are a SSI Dive Center, see our Class Category to LEARN MORE about our qualified programs. Join our experienced staff on a trip, or jump into one of our classes. Great fun for the whole family! Come join in the fun with the EXPERIENCED professionals at Aqua Adventures!
