Pressure Indicator - Standard on the HEED 3, The Dial Gauge Pressure Indicator is easy to read and shows an accurate measurement of tank pressure in 200 psi increments.
Purge Button - Clears the regulator and empties the Air Tank.
Mouthpiece - Standard regulator mouthpiece carried by SCUBA Diving Shops everywhere and is the same model used on most regulators.
Check Valve - Remove the cap and attach the Air Compressor adaptor to fill the HEED 3 in about 60 seconds (depending upon compressor). Or attach the optional SCUBA Tank Refill Adapter and connect the other end to a filled 3000psi SCUBA tank. Slowly open the tank valve and in 30-60 seconds, your HEED 3 is full.
3000 PSI Aluminum Tank - This SCUBA tank is manufactured just like standard SCUBA tanks, with the same safety features. The cylinder should be hydrostatically tested once every 5 years.
